Draw Tite Activator 2 Manual. Web bench test instructions 1. 4 may 2019, 12:45 pm rating:
DrawTite Activator II Trailer Brake Controller 1 to 4 Axles Time from www.etrailer.com
Read and follow all instructions carefully before installing or operating the brake control. Web using the other (2) self tapping screws as shown in the illustration. Setup preliminary adjustments with the trailer connected press and hold the brake pedal, the display will show the output setting.
If No Trailer Braking Is Felt Adjust The Output Control Slightly To The Left.
4 may 2019, 12:45 pm rating: Read and follow these instructions. Using the wire tap provided, splice the brake control's red.
While Watching The Test Bulb, Hold The Red Wire On The Positive (+) Battery Terminal.
In order to read or. Web manual control the manual control is located on the front of the brakecontrol unit at the right side. Web bench test instructions 1.
If You Have Any Questions About This Free Online Manual, Don’t Hesitate To Ask Minedit Down Below.
Keep instructions in your tow vehicle for future reference. Web if you’re looking for the draw tite activator ii manual, you’ve come to the right place. Connect the black wire to the “ aux” side of the circuit breaker with a ring terminal.
The Manual Control Only Applies The Trailer Brakes Andwould Be Usedin Situations When It Is Desirable To Reducespeed Slowly.
Web instructions for the installation and operation of electronic brake control for 2, 4, 6 & 8 brake applications read this first: Of wires, one row has four wires (inside row) the other has. Keep these instructions with the brake control.
Read And Follow All Instructions Carefully Before Installing Or Operating The Brake Control.
Row of seven (see wiring diagram above). • with the output control still set at maximum, slowly activate the. Web using the other (2) self tapping screws as shown in the illustration.
